[GB] Jelly Key - bornOFforest artisan

Born of Forest artisan keycaps

Then, we guess this is the moment everyone has been waiting for: How to make Born of Forest

Firstly, we cast resin on the base in which trees, mountains, and a house. The minimums times are at least 10 minutes for each keycap. Casting resin base, on the other hand, requires up to 8 hours to become harden. Then, the rough edges from the casting process are ground smooth. Each tree is trimmed carefully before dusting. It will take us about 30 minutes with base and trees, especially, spacebar profile and Herbts design will take more 20 minutes to complete deburring – dusting.

Next to the handmade-painting step, each detail includes the wood base, landscape, mountains need skill in the use of the hands. Each profile has its own time to be unique. For this reason, every single keycap is required up within 30 minutes to 2 hours before moving the next.

For each design, the grass is what we had to try many grass colors to make realistic nature. Times between 20 minutes to 40 minutes are considered suitable for sodding. Every single will has at least 3 types of grass and covered by 2 -5 types of highlight. For trees and houses, we stick carefully each detail within 20 minutes to 1 hour to be the basic scene of the forest. This step is considered a key point for this collection.

The keycaps will be moved to the final profile layers step. After casting into the molds with different sizes, those are put in paint pressure pots to be dryness within 16 hours. Finally, the artisans will clean the outer surface key-cap before having been tagged own serial number and added to inventory before delivering to you.

The trees, with a diameter of 1.5mm and a height of 3mm, are our challenge at this time. Within three different highlights for each one, we even can’t remember how many times we remade from the zero points for painting and sticking the trees on the base to able to get ultra-realism. However, while the creation is highly appreciated. We created a “Born of Forest” by our spirit, and “Born of Forest” is just with you!

specs

  • MX stem
  • Profile: SA r1 – 1u, SA r3 – 1.5u,2u,2.25u,2.75u,6.25u
  • Design and Handcrafted by Jelly Key

group-buy information

  • Open time: 6/20/2020
  • Close time: 6/26/2020
  • Starting to Deliver after Groupbuy: 70-90 days
  • We could close the GB sooner than expected. So take your chance as soon as you can.

what is in the box?

  • 1 Born of Forest artisan keycaps by Jelly Key.
  • 01 Medal dog-tag with engraved unique series number.
  • 01 Wooden box.
  • A unique serial number is on the bottom of the keycap as well.

sidenote

  • The keycap was made entirely by hand and tool. The final product may vary from the original photos but at acceptable aspect. We would love to ask you to tolerate any reasonable differents.
  • With each artisan keycap from Jelly Key, we offer you a one-on-one replacement if there is fault that causes by our artisan team. Feel free to contact us.
2 Likes

Oh wow thats an insane spacebar. :kissing_heart:

3 Likes

I have a small giveaway “Born of Forest artisan keycaps” at r/MK join with us and good luck to you <3

The last 24h to join Born of Forest artisan. And please remember that we will not run any group-buy again, please don’t miss this charm.

https://www.jellykey.com/artisan-keycaps/born-of-forest