Wait WHOA, I don’t know how I didn’t notice it until now but there’s a little QC test list on the back of the plate. I should check to see if mine has it too.
13 Likes
Hey guys!
Check out my new crazy experiment for contest!
Worst typing experience 
But still worth this fight
Here is comparison with my previous keyboard.
8 Likes
14 Likes
I really like the antique look of the keyboard!
Is it copper ?
The key caps pair very well with the board!
1 Like
It’s aluminum. Kin spent a lot of time trying to find a process that would be even and authentically “copper” looking. I think it’s anodized a bright copper, added a wash of some sort for a patina, partially removed (mechanically if I remember correctly), and then sealed with a clear coating.
Does anyone frequent the Korean customs community? I wonder what he’s doing. I haven’t really seen anything of note since the TKL classic and that was just a rehash of the v1 TKL without a weight for affordability.
I adore his designs. I own 7 of them.
5 Likes
Decided to go all out with red. Jamon on my Class60
https://www.instagram.com/p/DAGnqjaRnRl/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
Instagram doesn’t like my phone color profile info. Reds kinda bleeding. Oh well, it’s a fun keyboard.
Definitely going to put evil dolch on this one day
8 Likes
Absolutely gorgeous!!
1 Like
JTK Ride and JTK Emerald (Dolphin60/HMX Jammy; Cycle7/Akko V3CreamyBlackPro). Both such nice colors. Opted for Latin alphas on Cycle7, Cyrillic for the busier 60%.
Debated whether or not to put the Emerald in this Derivative, but Wasabi looks too good in it.
11 Likes
Wasabi was the move for sure.
2 Likes
Here’s a lame little cell phone sound test of today’s build.
Gat Smoothies on 3D printed PLA plate; POM Sirius60; GMK Striker 2; polyfill
6 Likes
That’s soooo clacky good job
1 Like
This sounds very nice !
2 Likes
Finished the big boi.
- SA Laser
- Durock Lupine
- Cherry C3 Stabs
Needs a better knob, besides that very happy with the build
15 Likes
How…? Where are the seams?!
1 Like
Full print of the Technofrikus case, I wouldnt have built the regular 3DP case 
1 Like
lol what printer do you have/what size is the bed??
1 Like
Not my printer 
but it was printed on a Ratrig 400
2 Likes
Shit. That’s going to be another rabbit hole isn’t it.
3 Likes