The virtue of not adhering to your 2021 resolutions…
… is that they’re as good as new for '22!
ok, i did build some boards, but oh my, i must do better this year
7 Likes
Get back down to 3 keyboards! So, when the Vega and M65-C finally arrive, I’ll need to sell.
8 Likes
Finish my Fusion360 course and start ideating/prototyping things in general, both for a future 3D printer and maybe try my hand at designing a housing
7 Likes
Happy new years!!!
- Finish building home office. My current setup is less than acceptable and I need to double down the finish my office by springtime.
- Polycarbonate Heavy-9 Q2 my most exciting build planned of next year
- Learn to tune Topre specifically stabs. I have read the guides have a plan just need to take time to do it.
- Reorganization in pretty much everything virtual and physical (GitHub, Imgur, Keyboards)
10 Likes
Happy New Year everyone!
For me, I’m trying to keep it simple in more ways than one.
- Don’t buy any more keyboards. Seriously, three is seriously enough for me.
- Buy things when I need them, not necessarily just because I want them (otherwise known as exercising a modicum of self control)
- Find jars that fit in my switch drawer. It’s starting to get chaotic in there.
- Continue to be a part of this community and interact with it as much as possible. Seriously, this is a great group and I love being able to get my keyboard nerdery out somehow. I’m so happy to be a part of it.
10 Likes
Happy new year y’all! Thanks for making a resolution thread again @sarvopari 
Let me just review what I said last year real quick…
I did a bit but not much.
Not even a little bit.
I haven’t been in that makerspace in 2 years, I need to cancel my membership at this point.
Haha no.
Uhhhhhhhhh… I think I’ll focus on being more consistent with lubing for now. I currently have 3 unbuilt keyboards, need to take care of those lol.
7 Likes
Hahaha. I empathize so much 
I’m enjoying reading all these!
4 Likes
No resolutions yet. I want to move a few MX-related things on because I’ve sold my soul to be one with cup rubber.
Appreciations: of course the help threads on KT and also big thanks to Discord/Topre scene where online interactions have truly taken the place of and sustained some kind of human contact for me during (i freaking hate this phrase) these unprecedented times
8 Likes
I can relate to this in so many ways. My hobby became a primary social outlet in the last 24 months. Very thankful for all of you.
8 Likes
My resolution is I want to start lubing more switches/ selling more lubed switches. Also would like to start a lubing service and hopefully if I work enough I could start a website but that seems impossible. For the past almost 10 months Ive been selling lubed switches and its something I really enjoy, and I would definitely like to take it to the next level as ridiculous as it sounds.
6 Likes
Not ridiculous at all! I used to do it a fair bit a few years back and toyed with setting up a site. If you enjoy it, go for it! And all the best in doing so if you do!
5 Likes
Happy New Year !
My keeb resolutions would be:
Learn new tricks by designing a new PCB.
Maybe one that uses optical switches ?
Start a new case project.
Open source one of my designs, a way to thank this awsome community for all that I learned interacting with it.
Would you like to make your own Manta75 guys ?
8 Likes
- Try and find a set of OG doubleshot keycaps
- Try and get a full set of jet axis and linear aristotles
- Lose 30kg until next new year’s eve
- Build WKL, HHKB, 1800 layout and exploded 75% kind of keyboards.
- Design open source files for metal, gasket mount case files for BM keyboards
- keep collecting interesting switches.
- ?
5 Likes
Yes lol that could be a fun side project
3 Likes
I’d love to actually get some alps switches this year. Ive had everything else for the build sitting around for like a year at least now….
4 Likes
My resolutions would be:
- To complete my Norbauer collection - remaining items are one Heavy-9 and one Norbaforce Data pad
- To quite possibly rounding out the MX keycap game with MT3 Retro and KAT Refined (GB joined, shipping not sure when)
- To go down another rabbit hole with High profile keycaps for Topre whilst keeping my wallet in tact - authentic Realforce caps are expensive as hell and KBDfans 1st set is somewhat disappointing sigh
4 Likes
Today is my first day in my new office I built in the basement. Like many, I was unexpectedly working from home since COVID March 2020. I made do with a few different spots in the basement but it was inconvenient dark and frankly a bit depressing. My employer moved to permanently remote as of a several months ago so I doubled down to make something nice.
It is not perfect, there are flaws/imperfections (track lights and satin paint highlight more things then I would prefer) but overall I am happy with it.
*Yes there is a hole in the ceiling for electrical access/building code compliance, planning on doing something nerdy and “fun”. Other then that need to do a few paint touchups and caulk on the window trim. *
Construction Photos: https://imgur.com/a/WLdgsBl
Party Mode
For all you RGB fans…
https://imgur.com/a/VBDg6uM
12 Likes
U should flip the desk around so u facing the door like a true executive 
4 Likes
Get your PC off the floor my dude lol.
1 Like
You gotta fold your hands together real menacingly as well.
1 Like