Yeah… part of me wanted to send a sassy “make me” letter. Then I realized these people could fine me into oblivion. Those lights came down, but I took them down as passive aggressively as possible.
One bulb at a time.

Your way was much smarter.
Sweet set up and pictures! I can’t quite tell, but if those lovely Adam monitors aren’t angled toward your ears in roughly an equilateral triangle you’re not getting the most out of them!
Any way, what were these shot on?
Edit: used a word one too many times like a weirdo.
Thanks! The adams are slightly angled but not too much since I roll away from the desk and listen to music. When I’m at my desk I’ve usually got my headphones on 
These were shot on my very old canon 550d (t2i for you folks stateside) using a 50mm f1.4usm lens
@Den-Fi should be
for posting here 
Question: is this just hobby or is it a mix with work stuff?
That’s a nice setup, but, it will be nicer with the tower on the floor 
It’s a mix. I don’t post anything that I use strictly for business, but all of my PCs are used to generate income in some way.
I want to see these business use computers.
Show me the hardware baby!

This is my work rig btw. It’s just on the right wing of my L shape desk at home.
I usually have a rotation of vintage boards over here while the modern ones live at my personal/not work rig.
It actually runs off this Lenovo Yoga via a hub which is nice if I need to take work on the go.
But normally it lives tucked away on the floor - where computers belong *ahem
Love the speeder bike wallpaper!
Just got my new desk setup after moving, condensed a bit to a smaller desk, but all the important stuff still fits. You can see the computer tucked away on the floor where it goes 
Sweet setup! But, where is the most essential element, the Baguette wrist rest? 
Don’t worry, that one still gets used on the daily, but it’s lived in my office pretty much forever. Since I’ve been moving most of my keyboards have been packed up so there hasn’t been a lot of rotation of boards, don’t worry pics with that bad boy will be back soon.
The civilizations growing on that thing remind me of Lord Bender
https://www.youtube.com/watch?v=f7sjvD89Mek&ab_channel=SYFY
Soon they’ll start launching nuclear attacks against the other wrist rests.
Current main PC setup:
Main System Components:
AMD Threadripper 3970X 3.7 GHz 32-Core Processor
Motherboard: Asus ROG ZENITH II EXTREME ALPHA EATX sTRX4 Motherboard
Memory: G.Skill Trident Z Neo 256 GB (8 x 32 GB) DDR4-3200 CL16 Memory
Gigabyte AORUS NVMe Gen4 1 TB M.2-2280 NVME Solid State Drive
Corsair MP600 Force Series Gen4 1 TB M.2-2280 NVME Solid State Drive
Samsung 980 Pro 1 TB M.2-2280 NVME Solid State Drive
Western Digital Black SN850 1 TB M.2-2280 NVME Solid State Drive
Gigabyte AORUS NVMe Gen4 2 TB M.2-2280 NVME Solid State Drive
Inland Performance 2 TB M.2-2280 NVME Solid State Drive
ADATA XPG GAMMIX S70 2 TB M.2-2280 NVME Solid State Drive
Sabrent Rocket 4 TB M.2-2280 NVME Solid State Drive
ASUS Hyper M.2 X16 PCIe 4.0 X4 Expansion Card
EVGA GeForce RTX 3090 24 GB FTW3 ULTRA GAMING Video Card
PrimoChill Praxis WetBenchSX ATX Test Bench Case
Corsair AXi 1600 W 80+ Titanium Certified Fully Modular ATX Power Supply
CableMod PRO ModMesh C-Series RMi & RMx Cable Kit (Black)
Watercooling Components:
Optimus Absolute Threadripper 3+ CPU Block - Copper Plate - Black Billet
Watercool MO-RA3 360 PRO Black
18x Noctua F12 PWM chromax.black.swap 120 mm Fan
Watercool HEATKILLER Tube 150 D5
Watercool HEATKILLER® Tube - Mounting Kit
Watercool MO-RA3 Foot POM
Watercool HEATKILLER® Tube - MO-RA3 Adapter
Watercool HEATKILLER® Tube - MultiPort Top 150
8x Darkside 4-Pin PWM Fan Sleeved 3-Way Splitter Cable, Jet Black
4x Koolance QD3 Male Quick Disconnect Compression Fitting
4x Koolance QD3 Female Quick Disconnect No-Spill Coupling
EK-Tube ZMT Matte Black 15,9/9,5mm
EK Water Blocks EK-AF Ball Valve
Aquacomputer D5 Next RGB
EKWB EK-Leak Tester
Full build log and a hell of a lot more pics: https://denfi.me/sanjuni









