What did you get in the mail today? (Part 1)

Just got my blue velvet tactiles in for my smoothie split, time to finish this build!

11 Likes


Got some Gat yellow ks-3 pro and porcelain blue to try out tonight

  • Gat yellow still has the best stock spring weight to me
  • Don’t know what to expect from these porcelain blue, these are my first tecsee switches
7 Likes

GMK Hammerhead (Light Base)
How did a whole 16 months pass so quickly :rofl:
I think the set came out really well. The spacebars only have a tiny bit of warp towards the end which shouldn’t even be visible once mounted (unlike other recent GMK sets of mine like MoDo light).

9 Likes

Krytox 105 Oil (10ml) ordered this morning about 9 a.m. CET and it promised me that they’ll deliver tomorrow.
Darn liars! It came a few hours later and the lubing could start!
Don’t know how this works, but DHL must have sold their soul to the devil just to make me a happy tactile gang guy today.

7 Likes


Grabbed 240 Gat milky yellow pros while the molds are still fresh, from Divinikey.

11 Likes

That’s a big brain move bud. I’m going to remember that. Duly noted.

1 Like


HHKB Professional Hybrid Type-S 25th anniversary edition, my first Topre board.

21 Likes

I actually have stashes of quite a few switches from when they first came out & thier molds were fresh. I figure buy them while the getting is good, then always have good switches for when I get new boards.

4 Likes

What’s this, a bunch of purple Bobas?

9 Likes

zealios v1 Redux?

3 Likes

Whats the consensus? There is a Black Friday deal going on if they are the Zeals :eyes:

1 Like

I have them in my cart, waiting on an answer… Ha

2 Likes

Yes, these are Zealio V1 Redux. I received amounts in 62 and 67 G.

I just wrote up some initial impressions after 15 minutes of testing:

5 Likes

Finally built the dark gray Meridian the other day. Got some GMK WoB in from Amazon yesterday. $70 out of my pocket! (after a giftcard + Amazon credit that they issued me for one of their mistakes) Pleased with it. Looks to be a nice match.

Also got this Xbox One controller off of hardwareswap for $30. Really dig the color + not being able to need a dongle/cable anymore to connect a controller to my PC.

8 Likes

Tell me about it.

I just learned of something called CAP V2 Crystal Tactile switches, and they’re already OOS:

I bet those were very fresh molds. So I feel kinda bad missing out on that.

Gateron CAP is pretty cheap, and often pretty good. I have both CAP Browns: milky and golden. I hope they are V2 - they came in the ‘animal bag.’ My Golden Browns are hand-lubed in the leaf area to reduce ping and noise.

It’s hard to imagine a factory Gateron CAP Brown being much better than the ones I already have, but it would be nice to know.

3 Likes

Ya, I’m curious about those, too. I’d never even heard of thockpop until I found their store searching for PTFE tape, and that’s where I first heard about the CAP Crystals. They generally have a good selection of tuning supplies.

1 Like

I’ve been waiting for this one.

GMK Prepress

Love the gray.

I pretty much went all-in on this one, except maybe for ortho if there was one.

I was already looking for a printing themed keyset when the IC popped up for this one, so I’m pretty stoked to have my hands on these. My day job is literally prepress, so I don’t think I could ask for a more suitable set of caps for my work keebs.

There’s the one at my desk - and there’s also the terminal station for the new machine… the keyboard tray faces the entrance to the room, and I feel like pretty much everyone there will get a kick out of seeing a bright CMYK keyboard on it the first time they walk in.

18 Likes

That’s so good!!! Pressing Enter has never been more satisfying. (Approved :+1:)

2 Likes

70x tealios 63.5g. Easing into linear got me deep into linear

9 Likes


Got 2 full setups (One with NK Creams & purple NK/Durock stabs, one with Durock Cobalt POMs & smokey PrimeKB/Durock stabs) & an extra plate in for my Meridian from @mwb today! Definitely glad I was able to grab these as I was planning on getting a few more plates & PCBs for it anyways, this saved me a few bucks for sure!

Not sure what I’ll be doing with them yet. Gonna desolder the switches so I can clean those & the stabs off to lube my way (nothing really wrong with these I’m just a snob about how my switches & stabs feel). Then I’m thinking one will get Gat Pro Yellows & the other Gat Xs when I get my batch of those so I do a head to head comparison of them.

9 Likes